Characteristics of the geogrids SNPP Texpol
Geogrid, glass, SPSS 50/50
Raw material: fiberglass
Breaking load along / across: 50 kN / m
Roll width: 4.0 m
Winding: 100 m
Size of the cell: 25; 40 mm
Impregnation: bituminous
Geogrid, glass, SNMP 100/100
Raw material: fiberglass
Breaking load along / across: 100 kN / m
Roll width: 4.0 m
Winding: 50 m
Size of the cell: 25; 40 mm
Impregnation: bituminous
Geogrids glass SSSP-K 50/50 with a substrate
Raw material: fiberglass
Breaking load along / across: 50 kN / m
Roll width: 4.0 m
Winding: 100 m
Size of the cell: 25; 40 mm
Impregnation: bituminous
Substrate from НСМ
Physico-mechanical characteristics and dimensions of the geosciences of the road SPSN Texpol ™
Geogrids SPSN Texpol ™ is designed for reinforcement of asphalt concrete pavements of road clothes, made of fiberglass in accordance with TU 2296-003-68781351-2012.
| Name | indicator | Geogrid | SOP | 25 / 25-25 | Geogrid | SOP | 30 / 30-25 | Geogrid | SOP | 40 / 40-25 |
Geogrid SOP 50 / 50-25 |
Geogrid SOP 80 / 80-25 |
Geogrid | SOP | 100 / 100-25 | Geogrid | SOP | 200 / 200-25 | ||||||
| Superficial | density, g / sqm | 150 | 170 | 200 | 300 | 350 | 500 | 900 | ||||||||||||||||
| Breaking load, | kN / m, not less than | -based on | -to the duck | 25 25 |
30 30 |
40 40 |
50 50 |
80 80 |
100 100 |
200 200 |
||||||||||||||
| Elongation at | break,%, not | more: | -based on | -to the duck | 3 3 |
3 3 |
3 3 |
3 3 |
3 3 |
3 3 |
3 3 |
|||||||||||||
| Allowable loss | strength at | stretching after | 25 cycles of freezing- | thawing,%, not more than | 10 | 10 | 10 | 10 | 10 | 10 | 10 | |||||||||||||
| Mass fraction of substances, | removed on ignition, | %, not less than | 18 | 18 | 18 | 18 | 18 | 18 | 18 | |||||||||||||||
| Dimensions of the side of the square | cells, mm ** (pref.,%) | 25 (±2) |
25** (±2) |
25 (±2) |
25** (±2) |
25** (±2) |
25** (±2) |
25 (±2) |
||||||||||||||||
| Roll width, cm, *** not more than | (previous off,%) | 600 (±2) |
600 (±2) |
600 (±2) |
600 (±2) |
600 (±2) |
600 (±2) |
600 (±2) |
* As agreed with the customer, it is allowed to supply Geospatial Tekpol ™ with other indicators
** The dimensions of the cells may have different values (12.7, 20.0, 25.4, 37, 40 or 50 mm).
*** The width of the roll can be set from the range: 100; 150; 200; 300; 400; 500; 540; 600cm.
For geogrids with cells from 25.4 mm and higher, the strength of the junctions must be at least
5% of the nominal value of the breaking load on the weft.