What is Geotextile 200 and where is it used?

Geotextile 200, in most cases, means its density, i.e. The weight of the geotextile is 200 grams per square meter. If the cloth is woven (geotextile), this parameter will mean discontinuous characteristics of 200 kN / sq.m. The most common abbreviations are the following types: geotextile IP 200, geotextile PP 200, geotextile PE 200, geotextile IGP 200, or geotextile 200/200 (geotextile).

Non-woven fabric geotextile 200 has the following characteristics:

Surface density - 200 g / m.

Breaking load not less than - 200 N / m;

Elongation at break is 70-130%.

Of course, the characteristics of the geotextile may vary depending on the raw materials used, polypropylene or polyester, and also on the production technology, in this example, the lowest values ​​are shown for secondary raw materials.

Non-woven geotextile cloth with a surface density of 200 grams per meter is used in the following areas:

• Use for sheltering plant seeds;
• Filter for drainage systems and pipes;
• On sports grounds;
• In landscape design;
• Pedestrian areas;
• The device of a soft roof;
• Used on slopes in combination with a geogrid.

Thermobonded geotextile canvas 200 g / m2. Use:

• The construction of footpaths and sidewalks;
• As a filter for drains;
• Apply in landscape design;
• When constructing temporary roads;
• When building soccer and playgrounds.
• At the device of foot paths and sidewalks;
• Parking;
• Parking for trucks;
• Temporary and access roads;
• Highway and motorway;
• Mounds above 2 meters;
• Runways;
• Railways;
• River and lake embankments;
• Drains drainage;
• Drainage systems;
• Protection of foundations;
• Landfills for disposal of solid waste;
• Drainage for bulk dams.
• River and lake embankments;
• Drains drainage;
• Protection against weeds, etc.

Thermofixing gives increased strength to geotextiles. Recommended for use!

>> Geotextile 250