Online order
Language:
English

Geogrid 150

Geogrid 150 / 200P
Geogrid 150 / 200P

Geogrid 150 / 200P

The height of the edge of the geogrid is 150 mm

The nominal cell size on the diagonal is 200 mm

The size of the side of the cell is 170x170 mm

The area of the module is 16.2 m2

Dimensions of the module in the expanded form 2500х6480 mm

Price for m2
298 rub.
Buy
Geogrid 150 / 300P
Geogrid 150 / 300P

Geogrid 150 / 300P

The height of the edge of the geogrid is 150 mm

The nominal cell size on the diagonal is 300 mm

The size of the side of the cell is 220x220 mm

The area of the module is 14.78 m2

The dimensions of the module in the expanded form are 2640x5600 mm

Price for m2
203 rub.
Buy
Geogrid 150 / 400P
Geogrid 150 / 400P

Geogrid 150 / 400P

The height of the edge of the geogrid is 150 mm

The nominal cell size on the diagonal is 400 mm

The size of the side of the cell is 340x340 mm

The area of the module is 21.6 m2

Dimensions of the module in the expanded form 2500х8640 mm

Price for m2
154 rub.
Buy

Of all the four sizes of geogrids proposed today for the construction of slopes and slopes, it is recommended to use a geogrid with a rib height of 150 mm. Such a polymer lattice

георешетка с высотой ребра 150 мм

is a volumetric modular design, designed to reinforce slopes and slopes with a different angle of incidence. Most often, the properties of geosynthetics are required for reinforcement of the lower component of the road foundation, with the strengthening of slopes and slopes, and also for the protection of watercourses. When laying the material on a weak foundation, the advice of specialists is to lay a layer of geotextile that prevents the spillage of the filler material. Such a layer reduces the risk of uniform precipitation, which generally increases the stability of the structure.

When implementing a geolattice, different tasks are posed. At the same time, with all the tasks set, the geosynthetically copes well.

Application of a 150 mm geogrid in road construction

When used in the construction of a roadway, the geogrid 150 serves to prevent deformation of the soil during shear, and also eliminates the drawdown of the web, by increasing rigidity and stability. Geosynthetics in railway construction, where it helps to solve problems of deformation of embankments, is also in demand.

When strengthening slopes and slopes

When constructing artificial embankments, it is recommended to use an unperforated geosynthetic, that is, without special holes in the edges of the lattice. Used in land management, the geogrid 150 protects against erosion, guarantees the strength and high stability of the structure. Due to its honeycomb structure, the grill eliminates water stagnation. Nevertheless, to improve the drainage properties it is recommended to use a perforated geogrid of 150 mm.

At a lattice edge height of 150 mm, the slope angle of the slope or slope should be 30-45 degrees. The use of a modular geosynthetics to solve earth issues is the simplest and most economical way. In addition to the tasks of strengthening inclined ground surfaces, geosynthetic promotes the construction of aesthetically pleasing appearance. And vegetation grown in the lattice only increases the reliability and strength of the structure.

With shore protection

To strengthen the coastal zone of water bodies and streams, it is advisable to introduce a geogrid 150 mm with perforations. In this area the geosynthetic reinforces the shore base and protects the slopes from water and wind erosion.

Go to Geogrid 200

Additional Information: